Install and pair the STRYK POS Bridge
You install the STRYK POS Bridge on a computer in the hotel network and pair it with a connection code. After that, your register posts to rooms.
Contents
Before you start
- STRYK POS is set up and at least one outlet exists: Set up STRYK POS. To connect, the add-on module STRYK POS must be active and your role must have Manage POS.
- You have a computer in the hotel network that the register can also reach and that runs permanently, for example the register server or a reception PC. A laptop that goes home in the evening is not suitable.
- You have administrator rights on this computer.
- Your register has a FIAS interface. You need the register technician to make the setting in the register.
Overview of the steps
Download the bridge
In STRYKSettingsPOS
- In the Connect POS section, open the Connection type Via STRYK Bridge.
- Select Download bridge. The page with the instructions and installation files opens.
- Download the file for your computer: for Windows
STRYK-POS-Bridge-<Version>-windows-x64.exe, for Linux the archivestryk-pos-bridge-<Version>-linux-x64.tar.gzor a package for.debor.rpm.
- Download the bridge
- Connection code
- Valid until
- Connected bridges
Install
Windows:
- Start the downloaded file by double-clicking it. Confirm the prompt for administrator rights.
- Wait until the installer sets up the program and the Windows service.
- The window “Enter connection code” appears. Select “Later” if you want to create the code later. You can then reach the program in the Start menu under “Connect STRYK POS Bridge”. “STRYK POS Bridge Status” shows the state.
Linux:
- Extract the archive and start
sudo ./install.sh. With the.debor.rpmpackage, install via your package manager. - The setup asks for the connection code. An empty entry connects later.
The bridge sets up the service so that it starts automatically after a restart. The register connects via FIAS to the IP address of this computer and port 5010. On Windows, the bridge opens the port only for the local network.
Create a connection code and connect
In STRYKSettingsPOS
- In the Connect POS section under Via STRYK Bridge, select the Create connection code button. STRYK shows the Connection code, for example ABCD-EFGH-JKLM, with “Valid until 10:15 (14:32 remaining)” and the note single use only.
- Optional: Copy the code with the Copy icon.
- Enter the code in the window “Enter connection code” and select “Connect”. Later on Linux, connect with
sudo stryk-pos-bridge connect <Code>. - The bridge reports “Connected to Hotel Nordlicht”. Select “Done”.
The code is valid for 15 minutes. A new code replaces an open one: select Create new code for this. An expired code shows “The code has expired. Create a new one if needed.”
Remove the bridge
In STRYKSettingsPOS
- In the Connected bridges list, select Remove bridge for the bridge.
- Confirm under Remove bridge? with Remove.
The bridge then no longer sends bookings and appears under Disconnected bridges. To reconnect, create a new code.
When STRYK cannot be reached
If STRYK cannot be reached, the bridge rejects room postings from the register by default. The register must then take payment another way. Your technician can specify in the file bridge.toml that the bridge accepts postings within amount limits. The bridge stores them encrypted and posts them once STRYK is reachable again.
How to check the result
In STRYKSettingsPOS
- In the Connected bridges list, check that the bridge is Online. Online means the bridge reported to STRYK within the last few minutes.
- Check Device, Version, Last reachable and Last posting. A new bridge shows “never” for Last posting.
- Send a test posting from the register. Last posting then shows the time.
When something does not work
| What you see | Cause | How to fix it |
|---|---|---|
| “The connection code could not be created.” | The add-on module STRYK POS is not active, or the connection is interrupted. | Check the module and create the code again. |
| “The code has expired. Create a new one if needed.” | The code was valid for longer than 15 minutes. | Select Create new code. |
| “Disconnected because STRYK POS was stopped” | The add-on module STRYK POS was stopped. | Book the module again and reconnect the bridge: Contract, add-ons and STRYK invoices. |
| The bridge shows Offline | The bridge does not report to STRYK. | Check whether the computer is running and the network can reach STRYK. |