Block rooms
You block rooms for maintenance, repair or owner use. Blocked rooms do not count as bookable.
Contents
Before you begin
- You have the Control availability permission. Owners, administrators and the Reception role have it. You assign it to the Housekeeping role if needed: Setting roles and permissions.
- The room is active and has no active booking in the blocking period.
- A block takes the room out of sale for a period. The room status, however, describes the cleaning: Room status and what it means.
Block a room
In STRYKRoomsRooms & categories
- Open the row menu of room 109 and select Block room. The Block room dialog opens. Room 109 appears under Rooms to block.
- Optional: select further rooms under Rooms to block. The period and reason apply to all selected rooms.
- Select the Reason: Cleaning, Maintenance, Repair, Renovation, Owner use or Other reason. In the example it is Maintenance.
- Select From and Until, in the example 14.12.2026 and 16.12.2026. The day under Until is still part of the block.
- Optional: enter a time under Release time (optional). STRYK lifts the block automatically on the day under Until at this time. Add Notes if needed.
- Wait for the conflict check. The check reports “Ready to block: 1 room” if there is no active booking and no other block in the period.
- Select Block 1 room. STRYK reports “Room 109 has been blocked”.
- Period
- Reason
- Conflicts
Planned and active blocks
In STRYKRoomsRooms & categories
In the Today column of the room list you see which rooms are blocked.
- If the block is running, it shows Blocked until 16.12.2026 with the reason.
- If the block starts later, it shows Block from 14.12.2026 with the reason.
In the Calendar, the bar shows “Blocked: Maintenance”. Blocked rooms do not count as bookable for sale. In the housekeeping plan the room appears in the group Blocked or inactive. Set the cleaning status again as soon as the block ends.
The Availability button shows the number of active blocks. The Room blocks tab lists all blocks with room, reason and period.
Lift a block
In STRYKRoomsRooms & categories
- Open the row menu of the room and select Manage block. The Room blocks tab shows the block.
- Open the menu of the block and select Release. STRYK reports “Room 109 has been released”. The room is bookable again immediately.
Optional: select Edit instead of Release to change period, reason or note, and confirm with Save.
In the Calendar, open the block and select Release. STRYK reports “Block lifted”. With a release time, STRYK lifts the block itself.
How to check the result
- The room list shows Blocked until 16.12.2026 or Block from 14.12.2026 in the Today column.
- In the calendar the room is marked as blocked during the blocking period: Read and use the occupancy calendar.
- After lifting, the Today column shows the room's occupancy again.
If something does not work
| What you see | Cause | How to fix it |
|---|---|---|
| “Wait for the conflict check before blocking.” | The check is still running. | Wait until “Ready to block” appears. |
| “The end date must be after the start date.” | Until is before From. | Correct the date. |
| “Active booking in this period” | The room has a booking on it. | Remove the affected rooms from the selection, change the period or move the booking: Change room. |
| “Existing room block in this period” | The room is already blocked in the period. | Change the period or edit the existing block. |
| “Inactive rooms are not sold anyway. Activate the room to plan a block.” | The room is inactive. | Activate the room in the row menu with Activate room. |
| “The conflict check could not be completed” | The connection to the check was interrupted. | Check the connection and try again. |
| “The block could not be created.” | STRYK did not save the block. | Read the message in the dialog, check the period and repeat the action. |