Skip to content
STRYK Availability

You only sell what is genuinely free.

No room goes on sale twice: STRYK combines bookings, room blocks, sales rules and adjusted room set-ups into one daily figure per category. Front desk and management block rooms with a reason, cap categories and see in advance what will be left. We built one availability for every channel: Booking Engine and Channel Manager work from the same figures.

Daily figures per category

Total, booked, blocked, reduced and free for every single day.

Blocks with a reason

Cleaning, maintenance, repair, renovation or owner use.

Preview before saving

Free now and free afterwards, day by day.

The last room, protected

Before every confirmation, STRYK checks free capacity again.

Overview

For every category and every day, you know what is still free.

For the period you choose, the overview shows per category and day the rooms in total, booked, blocked, reduced by room set-ups and free. STRYK marks days closed to arrival or departure. The occupancy calendar shows the same figure above every category.

  • Daily figures for total, booked, blocked, free
  • Markers for closed to arrival and departure
  • Free rooms per category in the calendar
  • Separate permission for availability changes
STRYK occupancy calendar: a direct booking from Sarah Leitner arrives as a notification. Reception drags the booking bar from room 106 into Panorama Studio 204, an upgrade.
Blocks

Room 307 is being renovated, and nobody sells it by mistake.

You block one or several rooms for a period, with a reason, an internal note and an end time if you need one. If bookings already fall within that period, STRYK names the affected rooms before the block takes effect. Blocked rooms drop out of room selection and sellable capacity and show clearly in the calendar.

  • Reasons from cleaning to owner use
  • Several rooms in one block
  • Conflict check against existing bookings
  • End time and internal note
Sales rules

Hold rooms for a group without selling the category out.

A sales limit caps how many rooms of a category can be sold per day, and existing bookings count towards it. With 10 rooms, 3 booked and a limit of 8, five stay open for new bookings. Add days closed to arrival or departure, on selected weekdays if you like, and the preview shows for each day what will be left.

  • Sales limit per category and day
  • Closed to arrival, closed to departure
  • Series by weekday
  • Preview: free now and free afterwards
Room set-ups

Offer the double room as a single for a week.

For individual rooms or whole categories, you set for a period how many guests can be sold and how many beds are made up. If you like, STRYK prices with a fixed number of guests, for example the single-occupancy rate. You can take a room off sale entirely for the period, or hide it from booking portals only.

  • Sellable guests and beds made up
  • Fixed guest count for pricing
  • Sell direct only, not on portals
  • No extra rooms, no reshuffling
Direct and channels

Website, front desk and portals read the same stock.

The Booking Engine only offers what is free after bookings, blocks and rules, and the Channel Manager passes the same figures to connected portals. Just before every confirmation, STRYK checks capacity once more. We added this final check so that two simultaneous requests never both get the last room.

  • Booking Engine with the same stock
  • Updates to connected portals
  • A fresh check before every confirmation
  • Permitted arrival and departure days for apartments
STRYK Buchungsseite: Ein Gast wählt auf der Website von Hotel Nordlicht zwei Nächte im Dezember, sieht die freien Zimmer mit Preisen direkt aus dem Belegungsplan und wählt das Panorama Studio mit flexibler Rate.Buchungsseite des Hotels: Der Gast sucht freie Zimmer, wählt das Panorama Studio mit Tarif und Frühstück und sieht die Zusammenfassung.

Protect a renovation.

We take you from the decision to stock that is safe from overbooking.

  1. 01

    Check the period

    See in the overview what is booked and free on those days.

  2. 02

    Create the block

    Choose rooms, period and reason, and add a note.

  3. 03

    Resolve conflicts

    Move affected bookings or take rooms out of the block.

  4. 04

    Review

    The new stock applies to front desk, website and portals.

Common questions: Availability & blocks

What does availability mean in STRYK?

Availability is the capacity that can still genuinely be sold on a property day. STRYK combines existing rooms, bookings, specific room blocks and manual category limits for this purpose.

Which values does the daily matrix show?

For each category and day, total inventory, booked rooms, blocked rooms, manual reduction and remaining availability are compared. The property therefore sees not only a number but also its cause.

Do internal booking and the Booking Engine use the same values?

Yes. Both use the same authoritative availability calculation. A block or reduction is therefore not merely shown decoratively in one view but respected in the actual booking journey.

Is availability checked again before saving?

Yes. Immediately before confirmation, STRYK checks free capacity and current sales limits again. A last room sold in the meantime is not promised twice.

What is a specific room block?

It removes a specific physical room from sale for a defined period. Booking selection, calendar and availability matrix all respect the same block.

Which reasons can be recorded for a block?

Cleaning, maintenance, repair, renovation, owner use or a custom reason can be selected. An additional note explains what the team must complete before release.

Show more questions
Can a block end at a specific time?

An optional release time can be set on the final day. This suits a morning technical inspection after which the room should become available again the same day.

How is a room released again?

An active block is deliberately removed in the block overview or ends after its defined period. The result flows immediately into calendar, room selection and remaining capacity.

What does a category limit do?

It limits, by day, how many rooms in a category can still be newly sold, without blocking a specific room. This helps, for example, during renovation phases or when you deliberately hold rooms back for an open enquiry. Groups with a call-off deadline, rooming list and master invoice are handled by group blocks, a separate function.

What happens to existing bookings when capacity is reduced?

Existing bookings remain intact. The limit controls how much more may be sold and cannot be treated as if confirmed stays simply disappeared.

Can a property close a period completely?

Yes. A closure or capacity limit of zero removes the affected sale from availability under control. Period, category and reason remain clearly traceable.

Can active and past blocks be found?

The overview searches room, category and reason, prioritises active blocks and can reveal past entries. The team can find an existing rule before accidentally creating a duplicate.

What is a flexible room setup?

It represents a prepared sales setup for a period, such as a double room for single occupancy or a family room with an extra bed. The physical category remains; only permitted sale is adjusted by day.

Which values belong to a room setup?

Sellable guest count, prepared beds and pricing occupancy are defined separately. STRYK therefore distinguishes how many people can stay, what is physically prepared and which occupancy the price applies to.

Does a flexible setup apply to a room or category?

Depending on purpose, it is assigned to a specific room or an entire category. Target and period always remain visible so a seasonal exception does not accidentally alter the wrong inventory.

Can a setup stop sales completely?

Yes. Sale permission is a separate state. A prepared room can therefore remain described internally without being offered as bookable during the selected period.

How are connected distribution channels handled?

The property decides which availability is distributed to connected channels. STRYK shows delivery, outcome and any discrepancy so the team works with the actual channel state.

How does STRYK protect different accommodation models from overbooking?

Depending on category, protection can apply to the entire accommodation or individual units. A classic room property can therefore be handled differently from a product with divisible units.

Does availability automatically change the room price?

No. Availability answers whether and how much may be sold. Prices, rate plans and pricing rules remain in the responsible pricing area but use the same sellable inventory in the actual booking offer.

Do availability changes remain traceable?

Creating, changing and removing blocks, limits and setups are attributed to the property and responsible user. Name, period and operational reason remain on the record.

Who may change availability?

Only employees with availability-management permission may change blocks and restrictions. Room or booking read access alone does not permit reducing sellable capacity.

Do defects and renovation belong in housekeeping?

No. States that block sales are managed as room or availability blocks. Housekeeping describes cleaning and release, while maintenance, defects and renovation must also affect the Booking Engine and sellable capacity.

Does availability control cost extra and how can you try it?

It is part of the STRYK core package, with no set-up fee and no separate availability module. In your demo access you block a room, reduce a category and check the result in the matrix, the calendar and the booking journey.

Set up your next renovation as a block.

Try STRYK for 14 days with your rooms, or we will show you blocks and sales rules in a demo.

Questions about STRYK?